Click on any picture below to see a larger version.

November 20, 2004 We are now moved into our new home! The 3 car garage is heated, and I have taken one of the bays to use as a work shop. No more cars in the way! At the end of the 5th row of of photos, I have added a few good pics of the exterior as it stands now. The car will never be "done", but the outside is starting to look close! :) I started to put the interior back in for (hopefully) the last time. I stripped all the seats out, and began by re-installing the carpet, console, seats and door tread plates. Then I trimmed the repro kick panels to fit better, and put those in too. The front seat is starting to look good! December 8, 2004 Now the slow process of refinishing the rear arm rest / quarter trim panels has begun. I took off the old upholstery, disassembled and cleaned everything, and began to work my way around, stretching the new fabric around the plastic molding. Once that was done, I cleaned up and re-installed the ash tray. The adhesive (3m spray adhesive) is slow to set up, and I only have so many clamps, so I have to work a little bit at a time, doing one side a day. January 2, 2005 I put one of the rear arm rests back in the car. Looking better! I also decided to re-try the top edge of the rear seat. It was too bumpy so I decided to add some more over the burlap to soften the edge of the foam. This also turned out well - though I don't have any photos of it right now.